FAQ / Operational / Misc.
- Coast Guard DSC Fact Sheet Basic Information regarding DSC and MMSI number usage
- HM90 Support Package Board Mount and Schematic
- DSC Sending: Will my DSC radio send position information even if I don't have an MMSI number programmed into it?
- IC78 Set Mode Table
- 4KL 40 and 80 meter birdy mod File. Note, Icom has not tested this and this is presented for review only.
- I have a marine radio and an AM/FM radio in my boat and am experiencing noise on both. They are both using the same antenna.
- V85: No charge indicator when charging with the BC-167
- W32A: Setting for cross band repeater operation
- PS125 / PS126 Power Supply Schematic
- HM7 Schematic
- HM36 Schematic
- HM14 Instructions
- M602 Hailer Function: Will a COMMANDMIC I or II operate the hailer on my M602?
- IC2KL 10 Meter Modification
- V85: Annoying Tone
- HM103 Instructions
- HM56 Schematic
- Command Mic 3: External Speaker Activation
- PS80 Power Supply Technical Information
- HM98A Technical Information: schematc, board layout, and Parts List
- HS85 Headset Schematic
- HS-20SB Microphone Switch Box Schematic and Instructions
- BC35 Battery Charger Schematic
- IC-T2 - How do I open up receive on my T2A/H?
- M802: User Channel List
- SSB Output Measurement
- Battery Technology Source - Non Icom. Icom is not responsible for this information
- DStar Error Codes for ID1 and IC91AD
- M504 Internal Speaker: Can I turn off the internal speaker (including the command mic) on my M504?
- Avionics external power source for portable radios.