Skip to main content

A14: Programming Bank Names

Note: this does not apply to the A14S model.

  1. Select the Bank by pressing FUNC key quickly and then 3 (BANK).
  2. Once you have the bank you want to name, quickly press FUNC to select Bank Name Programming then press the MR/MW key.
  3. The Bank number indication will disappear and a series of dashed lines will appear.
  4. Refer to the Memory Names chapter of the instruction manual that shows the specific keys to use to select letters and number.
  5. To advance to the next letter or number, use the Up arrow key. If you need to go back, use the Down arrow key.
  6. When finished, set the Bank Name by a quick press of the ENT/SET key.